SlipGrip Flexible GRP Flat Sheet Flooring
SlipGrip Flexible Flat Sheets are ideal for low trafficked areas or where less flexible sheets aren’t suitable, such as undulating walkways and ramps or surfaces that are not perfectly flat.
Stock Code:SGLP0.6X0.6B
Why Choose SlipGrip Flexible Flat Sheets?
- Highly flexible - our SlipGrip Flexible flat sheets are only 1mm thick, meaning they offer total manoeuvrability, ideal for undulating or uneven surfaces.
- Long lasting and durable - sheets maintain all the strength and durability of the rest of the SlipGrip range and will not crack when affixed to an undulating surface.
- Easy to replace - as these sheets are small (up to 2400mm wide by 1200mm long) and applied using adhesive alone (no fixing kits), if one does get accidentally damaged, it is easy to whip off and replace with another.
How to Install
-
We recommend a single fixing method for installing SlipGrip Flexible flat sheets. This consists of our structural adhesive -SP350 High Tack Adhesive or similar.
Preparation
-
Ensure the surface is clean, dry, and free from wax, oil, food residue or any other substance likely to affect the application of the paint. Grease and oil should be removed with our SlipGrip Standard Degreaser.
-
Dry fit all SlipGrip panels to ensure they fit freely and that they sit flat down on the surface. If required, SlipGrip can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.
-
Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.
Adhesive Application
-
Apply an approx. 6mm bead (this may need to be increased dependant on the substrate conditions) of the high strength gap filling adhesive around the periphery of the underside of the SlipGrip Flexible panels approx. 25mm in from the edges.
-
Then, starting from the bottom left corner come up at an angle (approx. 200mm across) and then down at an angle, to create a ‘peak and a trough’, repeat this until you reach the end.
-
Immediately press the panel firmly to the substrate to ensure adequate transfer of adhesive (depending on the size of the bead, this will elevate the sheet by approximately 1-1.5mm).
-
A firm bond will be achieved in about one hour under normal circumstances and conditions.
Sizes
- Options: 600mm x 600mm tiles or 2400mm x 1200mm sheets
- Thickness: 1mm
Colours
- Black
- White
- Yellow
All prices are for Next Day Delivery when ordered before 1pm. Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details. If your order is date/time critical please contact the office and we will be more than happy to look into quoting you for a dedicated vehicle delivery.
| Order Value | United Kingdom Mainland |
| £100 and under | £8.95 |
| £100.01 to £300 | £16.00 |
| £300.01 to £500 | £25.00 |
| £500.01 to £750 | £35.00 |
| £750.01 to £1000 | £42.00 |
| £1001.01 to £1500 | £52.00 |
| £1500.01 to £2000 | £67.00 |
| £2000.01 to £3000 | £95.00 |
| £3000.01 to £4000 | £120.00 |
| £4000.01 and over | £300.00 |
| Order Value | Highlands and Islands* |
| £100 and under | £20.00 |
| £100.01 to £500 | £100.00 |
| £500.01 to £1000 | £200.00 |
| £1000.01 to £3000 | £280.00 |
| £3000.01 and over | £300.00 |
| Order Value | Europe Zone 1 & Northern Ireland** |
| £100 and under | £35.00 |
| £100.01 to £3000 | £150.00 |
| £3000.01 to £6000 | £250.00 |
| £6000.01 and over | Please call 01440 712722 for a bespoke quote. |
* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.
