FibreGrid (HAVERHILL ONLY) are due to stock take on Thursday 26th and Friday 27th November 2020. Any orders made after 1:00pm Wednesday 25th November will be despatched from Monday 30th November 2020.

1 Box x 10 Surface Mounted Tactile Paving Tiles & Adhesive

PLEASE NOTE: Some of our tactiles may require an extended lead time. Please enquire before ordering. 


Our surface mounted tactile paving slabs incorporate raised profiles to warn people that they are approaching a change in elevation such as pedestrian crossings, staircase ascent and descent areas and many other applications.


Why Choose Surface Mounted Tactile Paving Tiles?


  • Quick and easy to install using the included adhesive which will cover up to 10 tiles. Installations can be completed in less than 2 hours, reducing disruption to pedestrians.
  • Ideal for - a range of substrates and applications. Tiles are easily cut to follow kerb lines or to accommodate ramps and manhole covers. Suitable for most standard surfaces including asphalt, wood, concrete, ceramic and steel, with no surface excavation necessary.
  • Range of options available - Highways (Controlled and Uncontrolled Crossing Points), and the Built Environment (Hazard Warnings Corduroy Surface).
  • Lightweight and easy to transport.
  • Hard wearing and durable - made from a hard wearing stone and resin composite.
  • Anti slip - tested using the pendulum test, our tactiles achieved a PTV of 65 in dry conditions, and 60 in wet conditions.

How To Apply


Surface Preparation

  • Ensure the surface is clean, dry and free from loose and friable material. Any “dished” or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface.

  • Dry fit all Surface Mounted Tactile tiles to ensure they fit freely and that they sit flat down on the surface.

  • If required, cut to shape prior to applying the adhesive using a 115mm angle grinder fitted with an abrasive or diamond cutting disc. Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.


Mixing the Adhesive

  • When mixing the adhesive, add the liquid hardener to the base material and mix thoroughly using an electric drill fitted with a mixing paddle paying particular attention to the edges and base of the tub. NOTE mixing by hand with a stick will not achieve the consolidation required.

  • Once mixed, the adhesive will start to cure in the tub within a few minutes by removing mix from the tub and spreading over the work site a longer working time can be achieved (depending on ambient temperature this could be between 30 minutes to 2 hours).



  • Begin by laying the tiles in the required format and position on site.

  • Apply the mixed adhesive to the prepared surface using a serrated float, keeping within the duck tape boundary but tight to all edges. A standard pack of adhesive contains 3.5 litres [equal to 2.2mm @ 1.6 m² - [1 standard box of tiles].

  • Apply tiles to adhesive by slightly rolling from one edge making sure that no air is trapped beneath. Use a wheel/roller working from the centre of the tile out. Press gently over the entire surface to thoroughly bed in the tile paying particular attention to corners and edges.

  • To finish the joints, kiln dried sand, the same colour as the tiles can be applied while the adhesive is still wet and swept off when full curing has occurred. To remove any excess adhesive allow to skin over then remove with a scraper. A small amount of white spirit can then be used to wipe away any residue. Duct tape should be removed once the adhesive has started to skin over.

2 hours installation time, can withstand light pedestrian traffic immediately after. For heavy traffic please allow 7 days for full cure. Do not install on a day when rain is due.

Please note: you MUST use the epoxy adhesive provided to apply the tactiles. Other adhesives will not achieve the desired result.

Technical Data Sheet

Mechanical Data Sheet

Adhesive Hardener Mechanical Data Sheet Download

Edge Fillet Data Sheet Download




  • All panels sizes are 400mm x 400mm as standard.
  • Thickness: 9mm including elevated section.
  • Suitable for most standard surfaces including asphalt, wood, concrete, steel and ceramic with no surface excavation required.

Controlled and Uncontrolled Crossing Tactiles

  • The purpose of these blister surface tactiles is to provide a warning to differentiate between where a footway ends, and where a carriageway begins.
  • Red should be used at Controlled Crossings Only and Stone should be used at Uncontrolled Crossings Only.
  • Controlled Applications (On-street): Zebras – Pelicans – Puffins – Toucans – Traffic signals with pedestrian phases.
  • Uncontrolled Applications (On-street): Side road crossings – Busy crossovers (vehicle crossings) – Crossings away from junctions – Kerb to kerb flat road humps – Signal controlled junctions without pedestrian phases (traffic lights)

Corduroy Tactile

  • The purpose of the corduroy surface is to provide a warning to the presence of hazards, such as stairs and level crossings. Consisting of rows of parallel half-round bars, it conveys the message “hazard, proceed with caution”.
  • Applications: Tops and bottom of stairs – Level crossing – Where a footway/footpath joins a shared route.

All prices are for Next Day Delivery when ordered before 1pm. Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details. If your order is date/time critical please contact the office and we will be more than happy to look into quoting you for a dedicated vehicle delivery.


Order Value United Kingdom Mainland
£100 and under £8.95
£100.01 to £300 £16.00
£300.01 to £500 £25.00
£500.01 to £750 £35.00
£750.01 to £1000 £42.00
£1001.01 to £1500 £52.00
£1500.01 to £2000 £67.00
£2000.01 to £3000 £95.00
£3000.01 to £4000 £120.00
£4000.01 and over £300.00


Order Value Highlands and Islands*
£100 and under £20.00
£100.01 to £500 £100.00
£500.01 to £1000 £200.00
£1000.01 to £3000 £280.00
£3000.01 and over £300.00


Order Value Europe Zone 1 & Northern Ireland**
£100 and under £35.00
£100.01 to £3000 £150.00
£3000.01 to £6000 £250.00
£6000.01 and over Please call 01440 712722 for a bespoke quote.


* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.