FibreGrid is open for business; Same day dispatch is available for most web orders, subject to stock. Orders can be placed online or speak to our sales team on 01440 712722 or at sales@fibregrid.com for all your enquiries. View our Government Notice, confirming we have complied with guidance on managing the risk of COVID-19.

 

SlipGrip Stair Treads Standard, 3020x345mm, Ral 5019 Yellow Nose

These are our older "bull nose" style stair treads. These are an affordable and versatile solution to your slippery stairs. Ideal for areas with medium to heavy footfall.

Stock Code:BESPOKE SGLC2

Why Choose SlipGrip Standard GRP Anti Slip Stair Tread Covers?

 

  • Quick installation - drill down with mechanical fixings and you're good to go. Minimal downtime and can be walked on immediately.
  • Their 55mm contrasting nosing also makes them Building Regulation and Disability Discrimination Act compliant.
  • Durable and tough - made from fibreglass GRP through the pultrusion process, our Standard Nosings are resistant to swelling, stretching or warping over a wide range of temperatures and physical stresses.
  • Anti slip top surface - our silicon quartz grit provides excellent anti slip properties providing increased safety on steps and stairs and the high contrasting colour aids visibility. The chamfered back edge also provides additional security to your stairs.

How to Install

 

Preparation

  • Ensure that the area is clean, dry and free from loose and friable material. Any “dished” or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface. You can patch repair concrete with our SlipGrip Step Edge Repair.

  • Dry fit stair tread covers to ensure they fit freely and that they sit flat down on the surface. If required, SlipGrip can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.

  • Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.

 

Fixing Kit Application

  • Apply an approx. 6mm bead (this may need to be increased dependant on the substrate conditions) of the high strength gap filling adhesive around the periphery of the underside of the stair tread covers approx. 25mm in from the edges. Then, starting from the bottom left corner come up at an angle (approx. 200mm across) and then down at an angle, to create a ‘peak and a trough’, repeat this until you reach the end. The adhesive is best applied using a skeleton gun.

  • Immediately press the panel firmly to the substrate to ensure adequate transfer of adhesive (depending on the size of the bead, this will elevate the sheet by approximately 1-1.5mm). A firm bond will be achieved in about one hour under normal circumstances and conditions.

  • Drill two holes on each side of the SlipGrip stair tread cover, the first approximately 60mm in from the back edge and 50mm from the side. The second one should again be approximately 50mm from the side and approx. 60mm back from the contrasting nosing (55mm) For larger treads, it may be necessary to have further fixing points in the centre of the tread.

 

 

 

Full Installation Guide

Technical Data Sheet

Mechanical Data Sheet

 

 

Sizes

  • Length: 3020mm
  • Profile: 345mm depth

All prices are for Next Day Delivery when ordered before 1pm. Prices shown are excluding VAT. All prices are for Next Day Delivery when ordered before 1pm. Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details. If your order is date/time critical please contact the office and we will be more than happy to look into quoting you for a dedicated vehicle delivery.

 

Order Value United Kingdom Mainland
£100 and under £8.95
£100.01 to £300 £16.00
£300.01 to £500 £25.00
£500.01 to £750 £29.50
£750.01 to £1000 £37.00
£1001.01 to £1500 £52.00
£1500.01 to £2000 £67.00
£2000.01 to £3000 £95.00
£3000.01 to £4000 £120.00
£4000.01 and over £300.00

 

Order Value Highlands and Islands*
£100 and under £20.00
£100.01 to £500 £100.00
£500.01 to £1000 £200.00
£1000.01 to £3000 £280.00
£3000.01 and over £300.00

 

Order Value Europe Zone 1 & Northern Ireland**
£100 and under £35.00
£100.01 to £3000 £150.00
£3000.01 to £6000 £250.00
£6000.01 and over Please call 01440 712722 for a bespoke quote.

 

* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.