Rapid Set Epoxy Concrete Floor Repair Mortar

Our Rapid Set Concrete Floor Repair Mortar is a heavy duty epoxy mortar which has been formulated to enable the rapid repair of concrete surfaces.

Stock Code:03N210ZZ2025

Why Choose Rapid Set Epoxy Concrete Floor Repair Mortar?


  • Excellent adhesion to concrete, stone, asphalt and metal.
  • Resistant to a wide range of chemicals, and is tolerant to road salts and freeze-thaw.
  • Quick and easy to apply - no need for primer, with high early strength development.
  • Ideal for - repair of worn and damaged steps and floors, spalled expansion joints and runways.

Surface Preparation

  • All surfaces should be clean, free from oil, grease and chemical contamination, free standing water, old paint and loose debris. Oil and grease should be removed. A stronger repair will result if the edges are cut straight with a chisel, angle grinder or similar tool. Steel should be grit blasted or mechanically abraded to a clean bright finish.



  • This should be carried out using a hand held drill & whisk.

  • The base and hardener components should be thoroughly mixed in the base container. In cold conditions, it will greatly aid mixing if the materials are stored in warm conditions.

  • Once the base and hardener are thoroughly mixed they should be transferred to a bucket and the aggregate added slowly. Mix thoroughly for 3-4 minutes until a homogenous mix is obtained.



  • Once mixed, the Rapid Set Concrete Floor Repair Mortar should be applied by either a steel trowel or float, working the mortar into the substrate to ensure maximum distribution of the resin/hardener. The surface can then be brought to the required finish using a steel float after the mortar has been well compacted.

  • Finishing is simplified by wiping of the trowel face using a cloth dampened with a solvent based antibacterial cleaner. On thicker sections the material should be compacted in layers, not exceeding 25mm.

  • All tools and equipment should be cleaned immediately using a solvent based antibacterial cleaner.

Technical Data Sheet




  • Tub Size: 5kg or 25kg
  • Coverage: 0.5m² per 5kg (at approx. 5mm depth)
  • Recommended Thickness Application: 5mm
  • Working Cure Time: 45 minutes

Prices shown are excluding VAT. Please note this is an all day courier delivery service and is not guaranteed. Please refer to point 6 of our terms and conditions for full details.


Order Value United Kingdom Mainland
£100 and under £9.95
£100.01 to £300 £16.00
£300.01 to £500 £25.00
£500.01 to £750 £35.00
£750.01 to £1000 £42.00
£1001.01 to £1500 £52.00
£1500.01 to £2000 £67.00
£2000.01 to £3000 £95.00
£3000.01 to £4000 £120.00
£4000.01 and over £300.00


Order Value Highlands and Islands*
£100 and under £45.00
£100.01 to £500 £100.00
£500.01 to £1000 £200.00
£1000.01 to £3000 £280.00
£3000.01 and over £300.00


Order Value Europe Zone 1 & Northern Ireland**
£100 and under £45.00
£100.01 to £3000 £150.00
£3000.01 to £6000 £250.00
£6000.01 and over Please call 01440 712722 for a bespoke quote.


* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.