RungGrip Anti Slip Ladder Rung Covers

RungGrip Anti Slip Ladder Rung Covers improve ladder safety with their anti slip surface and chemical resistance.

Stock Code: RG0.4X25

n.b - The 25mm ladders rungs will be back in stock estimated 6th July 2018.

Why Choose RungGrip Anti Slip Ladder Rung Covers?

  • Our RungGrip comes in a variety of lengths and sizes to fit most ladder rungs. We also offer a free cut to size service if our stock sizes aren't suitable. Call 01440 712722 now to place your bespoke order.

  • Anti slip - with a PTV value of 59 when dry and 55 when wet, our RungGrip provides the perfect solution to problems and injuries caused by slippery ladders.

  • Durable and chemical resistant - constructed from fibreglass, our RungGrip will resist chemical attack from corrosive fluids transferred from the sole of the boot. Also resistant to contact with food, oil and grease.

  • High visibility - our RungGrip make ladders more visible in areas where light is limited.

  • Easy and quick to apply, just adhere down with 3M 5200 Marine Adhesive Sealant.

Find out where else this product has been installed...

How to Apply

  • RungGrip is bonded to the existing steel rung using 3M 5200 Marine Adhesive Sealant.

 

Preparation

  • Ensure the ladder rung surfaces are clean, dry and free from loose and friable material.

  • Dry fit all RungGrip profiles to ensure they fit freely and that they sit flat down on the surface. If required, RungGrip can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.

  • Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.

 

Application

  • Using a suitable abrader, rub down the substrate to give an adequate ‘key’.

  • Turn the RungGrip profile upside down and apply a 6mm bead of the 3M 5200 Marine Adhesive Sealant around the inside of the RungGrip profiles. Then simply push the RungGrip profile over the rung and twist to ensure the adhesive coats the rung.

  • Level the RungGrip profile so that the top surface is completely horizontal. A spirit level can be used if required.

  • Important: Allow a minimum of 24 hours for the adhesive to cure. Test that the RungGrip profile is completely bonded before putting the ladder back into service.

Technical Data Sheet Download

Mechanical Data Sheet Download

Pendulum Data Sheet Download

 

Sizes

  • Lengths: 400mm, 600mm, or 1200mm

  • Width (top surface of rung): 25mm or 38mm

  • Depth: 25mm or 38mm

  • n.b. Bespoke sizes are available, however delivery periods may need to be extended. RungGrip can be cut to the required length, free of charge. Please call 01440 712722 for more information.

 

Colours

  • Safety Yellow

£14.95 ex VAT
( £17.94 inc VAT )

All prices are for Next Day Delivery when ordered before 1pm. Prices shown are excluding VAT.

Order Value United Kingdom Mainland
£100 and under £3.95
£100.01 to £300 £9.00
£300.01 to £500 £15.00
£500.01 to £750 £22.50
£750.01 to £1000 £30.00
£1001.01 to £1500 £45.00
£1500.01 to £2000 £60.00
£2000.01 to £3000 £90.00
£3000.01 to £4000 £120.00
£4000.01 and over £300.00


Order Value Highlands and Islands*
£100 and under £20.00
£100.01 to £500 £100.00
£500.01 to £1000 £200.00
£1000.01 to £3000 £280.00
£3000.01 and over £300.00


Order Value Europe Zone 1 & Northern Ireland**
£100 and under £35.00
£100.01 to £3000 £150.00
£3000.01 to £6000 £250.00
£6000.01 and over Please call 01440 712722 for a bespoke quote.

 

* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.

We have placed cookies on your device to help make this website better.