SlipGrip Heavy Duty Anti Slip Floor Paint - 5 Litres

Why Choose SlipGrip Heavy Duty Anti Slip Floor Paint?

• Extremely durable and long lasting - our two-part epoxy resin formulation means our heavy duty anti slip paint is resilient even in high traffic areas.

• Suitable for - a variety of substrates including concrete, wood, metal and any other porous substrates. Recommended for internal use such as warehouses, garages, showrooms, factories and schools.

• Excellent slip resistance - the advanced polyurethane formula includes a fine aggregate that evenly disperses as paint is applied.

• Easy to clean - our formula makes the floor much easier to clean than other anti slip solutions that require the grit to be scattered manually.

• Suitable for - medium to heavy foot and vehicle traffic. For lower traffic areas, use our SlipGrip Standard Anti Slip Paint.

How to Apply

• SlipGrip Standard Anti Slip Floor Paint is best applied using our 12" Roller, our 5" Paint Brush, and our Paint Scuttle.

• Alternatively, you can purchase our Premium Paint Bundle, which will give you everything you need to complete the job, as well as save you 20% on purchasing the products separately.

Preparation

• Ensure the surface is clean, dry, and free from wax, oil, food residue or any other substance likely to affect the application of the paint. Grease and oil should be removed with our SlipGrip Standard Degreaser.

• Previously painted surfaces should be roughened slightly using sanding material. New concrete should be left at least 28 days before applying the paint.

• No primer is required, however if you are applying to concrete, and you feel the surface needs a more smooth, porous key, you can apply our SlipGrip Concrete Keying Etchant to neutralise any remaining alkalinity in the cement and to remove further dirt and laitance (weak, dusty cement particles).

• For best results, the floor temperature should be at least 15°C. We do not recommend this product for use on metal or latex levellers.

• We also recommend patch testing a small trial area first in areas where appearance is critical.

Application

• Remove the two inner tins from the outer tin. Stir the contents of both inner tins well with our Paint Mixer, and then decant the contents of both inner tins into the outer tin. Then, using the Paint Mixer, mix the new contents of the outer tin thoroughly.

• Pour the contents into the paint scuttle, and submerge your roller into the scuttle, generously coating before applying your first coat to the surface. If you are painting an entire room, it's recommended you start at the edges first using a paint brush. Stir the paint intermittently so that the mixture stays consistent.

• Avoid applying the paint too thickly. Do not exceed 15m² per coat. Your first coat will take approximately 12 hours to dry (in a temperature of 15°), before it's ready for the next coat. In the meantime, clean your tools with our SlipGrip Tool Wash and repeat the process above once your first coat is dry.

• Following your second coat, ensure the paint is hard dry (not just touch dry) before bringing the area back into use. This should take another 12 hours in normal conditions, however can take up to 36 hours in unusual circumstances.

Technical Data Sheet Download

Mechanical Data Sheet Download

Sizes

• Tin Size: 5 Litres

• Coverage: 15m² per 5L (with two coats)

• Coat Amount: Two coats is recommended

Colours

• Light Grey (RAL 7035), Mid Grey (RAL 7036), Mid Blue (RAL 5015).

Pendulum Slip Test Values

• 59: Low slip potential