SlipGrip Standard GRP Anti Slip Flat Sheet Flooring

SlipGrip Standard GRP Anti Slip Flat Sheets are an affordable and versatile anti slip flat sheet flooring, suitable for all budgets.

Stock Code: SGSFS0.8X1.2B

As well as being unbeatable on price, the SlipGrip Standard Flat Sheets also maintain the excellent quality of the SlipGrip range. Best used to make slippery walkways and ramps safe, our Standard Flat Sheets are a general purpose, tough GRP suitable for both industrial and commercial use.

 

  Standard  Heavy Duty
Grit Type: Standard ExtremeCore®
MOHS Hardness Scale: 7 9
Ideal For: Commercial premises Industrial premises
PTV Test Reading Dry: 71 76
PTV Test Reading Wet: 63 70
Traffic Level: Medium Heavy
Prices From: £30.40 £60.18
Sheet Thickness: 4mm - 5mm with grit 5mm - 7mm with grit
Guarantee: 3 Years 10 Years

Find out where else this product has been installed...

How to Install

 

Preparation

  • Ensure that the area is clean, dry and free from loose and friable material. Any “dished” or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface.

  • Dry fit all SlipGrip panels to ensure they fit freely and that they sit flat down on the surface. If required, SlipGrip can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.

  • Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.

 

Fixing Kit Application

  • Apply an approx. 6mm bead (this may need to be increased dependant on the substrate conditions) of the high strength gap filling adhesive around the periphery of the underside of the SlipGrip panels approx. 25mm in from the edges. Then, starting from the bottom left corner come up at an angle (approx. 200mm across) and then down at an angle, to create a ‘peak and a trough’, repeat this until you reach the end. Immediately press the panel firmly to the substrate to ensure adequate transfer of adhesive (depending on the size of the bead, this will elevate the sheet by approximately 1-1.5mm). A firm bond will be achieved in about one hour under normal circumstances and conditions. Secure with mechanical fixings, as below.

  • Drill holes 50mm in from all edges at no more than 300mm apart from the centres. Depending on the width of the panels it may be necessary to provide fixing points at 600mm centres down the middle of the panels. As substrates vary considerably, additional fixings may be required to fix the panels down. If fixing down two pieces of flat sheet that is constrained by sides (i.e. a ramp with wall on either side) a 5mm expansion gap should be considered between the two or more sheets. This gap can be filled with a standard high modulus mastic.

 

SlipGrip Standard flooring sheets can come with predrilled holes for which there is a surplus. If you require the holes in a certain place please call 01440 712722.

Technical Data Sheet Download

Mechanical Data Sheet Download

 

Sizes

  • Lengths: 800mm, 1200mm, or 2400mm

  • Width: 1200mm

  • Thickness: 4mm

 

Colours

  • Black, Yellow and Stone

 

FibreGrid offer a free cut-to-size service if the above sizes aren't suitable for you. Call 01440 712722 now to place your bespoke order.

From £7.65 ex VAT
( From £9.18 inc VAT )
From £22.50 ex VAT
( From £27.00 inc VAT )
From £14.99 ex VAT
( From £17.99 inc VAT )
£3.75 ex VAT
( £4.50 inc VAT )
From £60.18 ex VAT
( From £72.22 inc VAT )
From £7.88 ex VAT
( From £9.45 inc VAT )
From £90.25 ex VAT
( From £108.30 inc VAT )
From £19.00 ex VAT
( From £22.80 inc VAT )

All prices are for Next Day Delivery when ordered before 1pm. Prices shown are excluding VAT.

Order Value United Kingdom Mainland
£100 and under £8.95
£100.01 to £300 £16.00
£300.01 to £500 £25.00
£500.01 to £750 £29.50
£750.01 to £1000 £37.00
£1001.01 to £1500 £52.00
£1500.01 to £2000 £67.00
£2000.01 to £3000 £95.00
£3000.01 to £4000 £120.00
£4000.01 and over £300.00


Order Value Highlands and Islands*
£100 and under £20.00
£100.01 to £500 £100.00
£500.01 to £1000 £200.00
£1000.01 to £3000 £280.00
£3000.01 and over £300.00


Order Value Europe Zone 1 & Northern Ireland**
£100 and under £35.00
£100.01 to £3000 £150.00
£3000.01 to £6000 £250.00
£6000.01 and over Please call 01440 712722 for a bespoke quote.

 

* Highlands and Islands include - the Scottish Highlands and Islands, Isle of Wight, Isle of Man and the Channel Islands. ** Countries included in Europe Zone 1 - Southern Ireland, France, Germany, Luxembourg, Netherlands & Belgium. For all deliveries outside Europe Zone 1, please call 01440 712722 to place your order.

We have placed cookies on your device to help make this website better.