SlipGrip Anti Slip Deck Coating For Wooden Decking

Why Use SlipGrip Anti Slip Deck Coating For Wooden Decking?

• Easy to apply - our 1 part non slip decking paint is ready to use straight from the tin. Simply roll onto stained or unstained timber decking.

• Aesthetically pleasing - our clear anti slip deck coating is the most subtle and aesthetically pleasing option for solving your slippery decking problems. Alternatively, a variety of tinted options are also available.

• Durable anti slip - the aluminium oxide aggregate within the coating provides an extremely durable anti slip surface.

• Ideal for - home decking and low traffic commercial areas such as restaurants, cafes, nightclubs and hotels.

How to Apply

• SlipGrip Anti Slip Deck Coating is best applied with our 12" Roller and our our 5" Paint Brush.

Preparation

• Ensure the surface is clean, dry, and free from wax, oil, food residue or any other substance likely to affect the application of the coating. No primer is required.

• SlipGrip Deck Coating relies on penetrating into the wood. If you aren’t sure whether your wood has been sealed (which means the SlipGrip Deck Coating might not stick to the deck), we recommend you pour a little drop of water on the deck. If it forms into droplets rather than in a pool, you will need to sand the deck lightly to make a key for the coating to adhere to the wood.

• Patch test a very small area to ensure you are happy with the appearance and that the product is applied successfully.

Application

• Give the mixture a good stir then use our 12" Roller to apply SlipGrip Deck Coating. Infill hard to reach areas with our 5" Paint Brush.

• Drying time is 2 - 4 hours, depending on weather conditions. If you need to apply a second coat, wait at least 8 hours for the first coat to properly cure before applying your second coat.

• Drying times are based on a substrate temperature of 20°C. Lower temperatures will prolong drying and recoating times. Do not apply to a damp surface, or when rain or frost is likely before SlipGrip Deck Coating has completely dried. Wood must be totally dry before application. Recommended working temperature is 10°c.

Technical Data Sheet Download

Mechanical Data Sheet Download

Sizes

• Tin Size: 2.5 Litres or 5 Litres

• 2.5 Litre Coverage: Approximately 10m2 (with two coats)

• 5 Litre Coverage: Approximately 20m2 (with two coats)

Coat amount: Two coats is recommended

Colours

• Clear

• Light Oak

• Silver Birch

• Sage Green

n.b. Our deck coating dries to a lightly textured, low sheen finish.

Pendulum Slip Test Values