- Product Details
SlipGrip Flat Sheet has been a consistently good seller for us over the years. However, it is best suited to a flat surfaces that don’t move. So, we came up with SlipGrip Sprint for customers who wanted more flexibility and whose surfaces experienced lighter traffic.
At only 1mm thick, SlipGrip Sprint offers total manoeuvrability, but it is still strong, so won’t crack. The secret is in the resins we use, which are themselves flexible. This allows the product to be affixed to an undulating surface.
Another benefit is that as these sheets are small (up to 2400mm wide by 1200mm long), if one does get accidentally damaged, it is easy to whip off and replace with another.
You can have SlipGrip Sprint in black, white or yellow.
- Specifications + Technical Data Sheets
SlipGrip Sprint is available in standard stock sheet sizes 2400mm x 1200mm and off the shelf as 600mm sheets. The larger sheets allow for simple fast installation of large areas.
The 600mm sheets allow for easy replacement of damaged areas, without the need to purchase full sized sheets.
Thickness - 1mm
Colours Black White Yellow
- How To Apply
Ensure that the areas to have Flexi-Lite fitted are clean, dry and free from loose and friable material. Any “dished” or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface.
Dry fit all Flexi-Lite panels to ensure they fit freely and that they sit flat down on the surface. If required, FlexiLite can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.
Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.
We recommend a single fixing method for installing the FlexiLite product. This consists of an appropriate structural adhesive. (Tremflex, supplied by us or similar).
Apply an approx. 6mm bead (this may need to be increased dependant on the substrate conditions) of the high strength gap filling adhesive around the periphery of the underside of the Flexi-Lite panels approx. 25mm in from the edges. Then, starting from the bottom left corner come up at an angle (approx. 200mm across) and then down at an angle, to create a ‘peak and a trough’, repeat this until you reach the end. Immediately press the panel firmly to the substrate to ensure adequate transfer of adhesive (depending on the size of the bead, this will elevate the sheet by approximately 1-1.5mm). A firm bond will be achieved in about one hour under normal circumstances and conditions.
How to Install SlipGrip® Sprint Flat Sheets
- Request a Quote/Sample
Shipping Cost Sale Value: UK Next Day: Highlands & Islands: Europe Up to £100 £3.95 Flat Rate 20% of Sale 25% of Sale £100 - £500 5% of Sale 20% of Sale 20% of Sale £500 - £1000 5% of Sale 20% of Sale 15% of Sale £1000 - £3000 5% of Sale 16% of Sale 10% of Sale £3000+ 5% of Sale 10% of Sale 8% of Sale